Software- & firmwaredownloads
By downloading software and firmware, you agree to the terms of our Software Download Agreement.
Downloads til CDJ-1000 MK3
Oversigt
| Download-beskrivelse | Version | Dato |
|---|---|---|
| Firmware update | 2.30 | 07-08-2009 |
Firmware update
| Download-link | Version | Dato | Størrelse |
|---|---|---|---|
| CDJ1000MK3_V2.30.iso | 2.30 | 07-08-2009 | 2.81 MB |
Download opdateringsinstruktionerne
This update will improve the Master Tempo performance, the readability of dirty or scratched discs and mp3 playback.
You'll only need to update your CDJ-1000MK3 if it has a System Version lower than 2.30.
Just follow the five easy steps below:
1. Check which version of the CDJ-1000MK3 you own
- Turn the player on.
- Press down the RELOOP/EXIT button for 10 seconds. The system version will appear on the player's display.
- Remember, you'll only need to update if your System has a Version lower than 2.30.
- To return the CDJ-1000MK3 player to its normal operating state, turn the player off and then on again.
2. Download the Update
- The file is 2.81MB and was released on 7 August 2009
- If your browser does not automatically start the download process, be sure that your browser or security software is set to allow downloading of files from this web site.
- You can also right-click the button and select “Save Target As” to start the download process.
3. Check the Firmware File
- Check the size (2.81 MB) of the downloaded firmware file CDJ1000MK3_V2.30.iso by right-clicking on the file and selecting Properties. (Download again if the file size is incorrect.)
4. Create the Update Disc
- It is important to use a good quality branded blank CD-R disc or completely erased CD-RW disc.
- Create the update disc by burning the file to a CD-R or CD-RW disc.
- Burn the file to the disc using disc-at-once mode (2x Speed) and ISO 9660 CD-ROM file system format. (The player will not recognize the update disc and the update cannot be performed if the file is not burned correctly to the disc.)
- Make sure that the disc session is closed / the disc is finalised.
5. Update your device
- Update the firmware using the CD-R or CD-RW disc containing the firmware file.
- Perform the update following the procedure given in the PDF CDJ-1000MK3 update instructions.
- Note: Do not turn off or disconnect power, or remove a disc while update is in progress.