2 Channel Class-FD Amplifier (2 x 300W / 2008 Model)

PRS-D220

Maximum Output Power 2 x 300W (4Ω) or 1 x 1200W (4Ω)
Continuous power output (RMS)
• 14.4V (20Hz-20kHz/4Ω): 2 x 150W (1.0%)
• 14.4V (1kHz/2Ω): 2 x 300W (1.0%)
• 14.4V (bridged 1kHz/4Ω): 1 x 600W (1.0%)
Load impedance capability 2 - 8Ω allowable (≥4Ω bridged)
Frequency response 10 - 40.000 Hz
Distortion <0.005 %
S/N ratio >100 dB
Bass Boost 50 Hz, 0/6/9/12 dB (remote)
LPF 40 - 500 Hz (-12dB/oct)
HPF 40 - 500 Hz (-12dB/oct)
Subsonic Filter (HPF) Yes
RCA terminals Yes (1 input, 1 output)
Speaker Terminals Gold-plated screw-type
Speaker line input sensor Yes
High Voltage Input 400m - 6.5 V

All of our bridgeable amplifiers have an Input Level Control, which is adjustable over 6.5 volts of input signal. This means that all our amplifiers pick up signals from Hi-Volt headunits of line drivers, without any clipping.
Input level control RCA (400mV - 6.5V) (Low) SP (1.6V - 26V) (High) Switchable
Max. current consumption (A/4Ω) 25 A
Chassis size (W x H x D) 304 x 56 x 195 mm
Unit weight 2.8 kg