Hem > Support > Nedladdning av firmware och programvara

Nedladdning av firmware och programvara

 Eller sök efter nedladdningsbart material för

Nedladdning för CDJ-800 MK2

Översikt

Beskrivning av fil att ladda ned Version Datum
CDJ-800MK2 Firmware Update 2.10 15-04-2008




CDJ-800MK2 Firmware Update

Nedladdningslänk Version Datum Storlek
CDJ-800MK2_V2.10.iso 2.10 15-04-2008 2.68 MB

Ladda ned instruktioner för uppdatering


This update will improve the Master Tempo performance, improve readability of dirty or scratched discs and improves loop performance and better disc recognition (CD-R – CDDA).

You'll only need to update your CDJ-800MK2 if it has a System Version lower than 2.10.

Just follow the five easy steps below:

1. Check which version of the CDJ-800MK2 you own

  • Turn the player on.
  • Press down the RELOOP/EXIT button for 10 seconds. The system version will appear on the player's display.

    Check version
  • Remember, you'll only need to update if your System has a Version lower than 2.10.
  • To return the CDJ-800MK2 player to its normal operating state, turn the player off and then on again.

2. Download the Update

  • The file is 2.68MB and was released on 15 April 2008
  • If your browser does not automatically start the download process, be sure that your browser or security software is set to allow downloading of files from this web site.
  • You can also right-click the link and select “Save Target As” to start the download process.

3. Check the Firmware File

  • Check the size (2.68MB) of the downloaded firmware file CDJ800MK2_V2.10.iso by right-clicking on the file and selecting Properties. (Download again if the file size is incorrect.)

4. Create the Update Disc

  • It is important to use a good quality branded blank CD-R disc or completely erased CD-RW disc.
  • Create the update disc by burning the file to a CD-R or CD-RW disc.
  • Burn the file to the disc using disc-at-once mode (2x Speed) and ISO 9660 CD-ROM file system format. (The player will not recognize the update disc and the update cannot be performed if the file is not burned correctly to the disc.)
  • Make sure that the disc session is closed / the disc is finalised.

5. Update your device

  • Update the firmware using the CD-R or CD-RW disc containing the firmware file.
  • Perform the update following the procedure given in the PDF CDJ-800MK2 update instructions.
  • Note: Do not turn off or disconnect power, or remove a disc while update is in progress.